Sea-Doo 3D HO TLOHA KA 2006
Litlhaloso tsa theknoloji
Mohlala
| Mofuta oa mohlala | 1-setulo se lutseng |
| Год | 2006 |
| Etsa | Leoatle-Doo |
Enjene
| Letšoao la enjine | rotax |
| mofuta oa enjene | E mocheng |
| Ea diselennere | 2 |
| Palo ea mehato | 4 |
| Matla (hp / kW) | 130 / 97 |
| Ho futhumatsa | Metsi (potoloho e bulehileng) |
| Tlhophiso ea li-valve | SOHC |
| Bophara ba cylinder (mm.) | 88 |
| Piston stroke (mm.) | 78.2 |
| Phallo ea enjine (cc) | 951 |
| Compression ratio | 6.0:1 |
| Qalang | Electro |
| Mofuta oa mafura | Gasoline |
| Turbocharger | No |
| Supercharger | No |
| Injector | hore |
| Boholo ba ente (mm.) | 46 |
| Carburetor | No |
| Molaoli oa lebelo | No |
| Fetoha / Thapo | E tloaelehileng |
| Phetoho ea ho emisa enjene ea tšohanyetso | E tloaelehileng |
| Sistimi ea ho fokotsa lerata | Sistimi ea D-Sea-BeI |
Lebokose la Gear
| Mofuta oa phetiso | Ho khanna ka kotloloho |
| Khutlela morao | No |
| Mofuta oa choke (mofuta oa throttle) | Thupa |
Tsamaiso ea tsamaiso
| Mochine | Setataisi se Thusang sa Off-Throttle (OTS) |
| Tšoaea | Buka ea litaelo |
| Seterei sa matla | hore |
| Tsamaiso | Kholomo ea Tsamaiso |
| Ho lokisoa ha khoele ea tsamaiso | E tloaelehileng |
Litlhaloso tsa theknoloji
| Bolelele (mm.) | 2718.816 |
| Bophara (limilimithara.) | 1117.6 |
| Boima | 922 |
| Boima bo omileng (kg.) | 277 |
| Bokhoni ba tanka (l.) | 35 |
| Bophahamo ba phaposi ea thōtō (l.) | 6.2 |
| Ho falla ha enjine ho ea boima (cc) | 1.56 |
Litulo
| Mofuta oa setulo | E feletse |
| E ka fetoha | No |
| Boitsebiso | Vinyl |
| sebaka | Mokhanni |
| Palo ea litulo | 1 |
Ponahalo
| Lisebelisoa tsa 'mele | Fiberglass Reinforced Composite (FRC) |
| Lintho tse bonahalang | Fiberglass Reinforced Composite (FRC) |
| Mofuta oa khetla | Semi V |
| Sebaka sa libaka tsa maoto | Mokhanni |
| Anti-slip coating | hore |
| Mabapi | E tloaelehileng |
| Tšireletso khahlanong le tšenyo ha e emisitsoe | E tloaelehileng |
Lisebelisoa tsa ho lekanya
| Phanele ea lisebelisoa tsa dijithale | E tloaelehileng |
| Mofuta oa alamo ea mocheso | Lebone |
| Mofuta oa tlhokomeliso ea boemo ba mafura | Lebone |
| Letšoao la litšebeletso | E tloaelehileng |
Boitsebiso ba mohlala
| Mofuta (oa mantlha) | 1-setulo se lutseng |
| Selemo sa ponahalo | 2006 |
| Sehlooho | 3D DI |
Ho raea
| Tlare | E tloaelehileng |
Tsamaiso
| Mofuta oa sefofane sa jete sa metsi | Axial |
| Bophara ba jete ea metsi | 155.5 |
| Boitsebiso | Aluminium |
| Lintho tse impeller | Lisebelisoa tsa tšepe |
| Letšoao la sistimi ea ntlafatso | Variable Trim System (VTS) |
| Mofuta oa tsamaiso ea ho lokisa | Buka ea litaelo |
Matšeliso
| Setereing se feto-fetohang | E tloaelehileng |
| Letšoao la Immobilizer | Sistimi ea Tšireletso e Kentsoeng ka Dijithale (DESS) |
| Mofuta oa sistimi ea ho omisa | siphon e iketsang |
Thepa
| Raka e ka pele | E tloaelehileng |
Penta le ho qeta
| Sehlopha sa listikara | E tloaelehileng |
VideosSimilar
