Iketsetse tokiso ea silinda e sebetsang le phetoho ea clutch drive VAZ 2107

Mathata a clutch a ka baka mathata a tebileng ho beng ba likoloi tse nang le lebokose la li-gearbox. VAZ 2107 ha ho joalo. Leha ho le joalo, boholo ba ho se sebetse hantle bo ka lokisoa habonolo ka matsoho a hau.

Sesebelisoa le molao-motheo oa ts'ebetso ea clutch VAZ 2107

VAZ 2107 e na le clutch ea mofuta oa disk e le 'ngoe e nang le hydraulic drive. Sebopeho sa drive se kenyelletsa:

• tanka e nang le setopo le damper e entsoeng ka metsi;
• pedali e emisitsoeng ka pusher;
• li-cylinders tse sebetsang hantle le tse sebetsang;
• pipeline ea tšepe;
• hose e kopanyang phaephe le moqomo o sebetsang.

Ha pedal e hatelloa, matla a fetisoa ka pusher ho piston ea clutch master cylinder (MCC). GCC e tletse ka brake fluid e tsoang polokelong ea hydraulic drive. Piston e sutumelletsa mokelikeli o sebetsang ka ntle, 'me e kena ka har'a clutch cylinder (RCS) tlas'a khatello ka pipeline le hose ea rabara. Ho RCS, khatello ea eketseha, 'me mokelikeli o sutumelletsa molamu ka ntle ho sesebelisoa, e leng se etsang hore fereko ea clutch e sebetse. Ka lehlakoreng le leng, fereko e tsamaisa thepa ea ho lokolla, e tlosa khatello le li-disk tse khannoang.

Clutch ea VAZ 2107 e na le moralo o omileng oa disk e le 'ngoe e nang le hydraulic drive

Clutch lekhoba silinda VAZ 2107

RCS ke sehokelo sa ho qetela sa clutch ea hydraulic. Ho hlōleha ha eona khafetsa ha ho bapisoa le likarolo tse ling tsa mochine ho amahanngoa le meroalo e eketsehileng e bakoang ke khatello e phahameng ea metsi.

Silinda e sebetsang e tlas'a meroalo e sa khaotseng, 'me hangata ho feta likarolo tse ling tsa mochine oa clutch, e hlōleha.

Mabapi le ho nkela clutch master cylinder VAZ 2106: https://bumper.guru/klassicheskie-modeli-vaz/stseplenie/glavnyy-cilindr-scepleniya-vaz-2106.html

Sesebelisoa sa RCS

Moqomo o sebetsang oa VAZ 2107 o na le:

• bolulo;
• piston;
• molamu (mosututsi);
• liliba;
• sekoahelo se sireletsang (nyeoe);
• li-cuffs tse peli (mehele ea ho tiisa);
• valve ea ho tsoa mali;
• selikalikoe se nang le washer.
  

  Moqomo oa lekhoba la clutch o na le sesebelisoa se bonolo.

Sebaka sa RCS

Ho fapana le GCC, e ka kamoreng ea VAZ 2107, silindara ea lekhoba e lutse holim'a ntlo ea li-clutch 'me e kenngoa ka tlas'a "tloloko" ka liboutu tse peli. U ka fihla ho eona feela ho tloha ka tlase, ka mor'a ho tlosa tšireletso ea enjene (haeba e le teng). Ka hona, mosebetsi oohle o etsoa ka sekoting sa ho shebella kapa ho feta.

Moqomo oa lekhoba o khomaretsoe ka tlase ho ntlo ea clutch.

Sheba likhetho tsa ho lokisa enjene: https://bumper.guru/klassicheskie-modeli-vaz/tyuning/tyuning-dvigatelya-vaz-2107.html

Matšoao a ho se sebetse hantle ha RCS

Ho hlōleha ha RCS ho tsamaisana le matšoao a latelang:

• ho tsamaea ka mokhoa o sa tloaelehang oa clutch pedal;
• ho hlōleha ha nako le nako kapa kamehla ha clutch pedal;
• ho fokotseha ho hoholo ha boemo ba mokelikeli o sebetsang ka tanka;
• ponahalo ea marotholi a mokelikeli tlas'a koloi sebakeng sa gearbox;
• mathata ha o chencha likere, a tsamaea le crunch (ho sila) ka lebokoseng la gear.

Lipontšo tsena e ka 'na ea e-ba phello ea ho se sebetse hantle (ea mochine oohle oa clutch, GCC, gearbox, joalo-joalo). Ka hona, pele u qala mosebetsi oa ho fetola kapa ho lokisa RCS, u lokela ho etsa bonnete ba hore ke eena "molato". Ho etsa sena, e lokela ho hlahlojoa ka hloko. Haeba mesaletsa ea mokelikeli o sebetsang o fumanoa 'meleng oa cylinder, molamu oa eona kapa hose, u ka qala ho qhaqha RCS.

E 'ngoe ea matšoao a ho se sebetse hantle ha cylinder e sebetsang ke mesaletsa ea litšila tsa lero le sebetsang' meleng oa eona.

Litšitiso tse kholo tsa RCS

Karolo e ka sehloohong ea RCS e entsoe ka tšepe e tšoarellang, kahoo e fetoloa ka ho feletseng feela haeba ho na le tšenyo e tebileng ea mochine. Maemong a mang, u ka khona ho lokisa feela. Hangata, moqomo o hloleha ka lebaka la ho roala ha mehele ea piston, sekoaelo se sirelletsang, ho se sebetse hantle ha valve ea ho lokolla moea le tšenyo ea hose e kopanyang moqomo le phala.

Tokiso ea lisebelisoa tsa RCS

Karolo efe kapa efe e robehileng e ka rekoa ka thoko. Leha ho le joalo, ha u fetola li-cuffs, ho molemo ho reka thepa ea ho lokisa e kenyelletsang litiiso tse tharo tsa rabara le sekoahelo se sireletsang. Bakeng sa mefuta ea khale ea VAZ, lisebelisoa tsa ho lokisa li fumaneha tlas'a linomoro tse latelang tsa lethathamo:

• 2101-1602516;
• 2101-1605033;
• 2101-1602516.
  

  Sesebelisoa sa tokiso bakeng sa moqomo oa lekhoba la clutch VAZ 2107 se kenyelletsa sekoaelo se sireletsang le li-cuffs tse tharo.

Litsenyehelo tsa sete e joalo ke li-ruble tse 50.

Tokiso ea Clutch Slave Cylinder

Bakeng sa ho lokisoa, RCS e tlameha ho tlosoa koloing. Sena se tla hloka:

• lisebelisoa tse pota-potileng nko kapa lithapo;
• li-wrenches bakeng sa 13 le 17;
• setshelo bakeng sa ho ntša metsi;
• lesela le omileng le hloekileng.

Ho felisoa ha RCS

Ho qhaqhoa ha RCS ho etsoa ka tatellano e latelang:

1. Re kenya koloi ka sekoting sa ho shebella kapa ho feta.
2. Ho tloha ka sekoting sa ho hlahloba ka senotlolo sa 17, re tlosa ntlha ea ho hokahanya pakeng tsa hose ea hydraulic le cylinder e sebetsang.
   

   Ntlha ea hose ea hydraulic drive ha e koaletsoe ka 17 wrench
3. Re kenya setshelo qetellong ea hose ebe re bokella mokelikeli o tsoang ho eona.
4. Tlosa mohloli oa ho khutla ho tloha ferekong ea clutch ka pliers 'me ue tlose.
   

   Ho kopanya selemo ho tlosoa ka lisebelisoa
5. Ka pliers re ntša pinana ea cotter ho tloha molamu oa cylinder.
   

   Pini e ntšoa ka molamu oa cylinder ka pliers
6. U sebelisa senotlolo sa 13, lokolla liboutu tse peli tse sireletsang RCS ho crankcase.
   

   Moqomo oa lekhoba la clutch o tlameletsoe ka har'a crankcase ka liboutu tse peli.
7. Hakolla sekotwana sa selemo ebe o se tlosa.
   

   Bracket ea ho khutla ea selemo e kenngoa holim'a liboutu tse tšoanang le cylinder
8. Re tlosa molamu oa cylinder e sebetsang ho sebelisana le fereko.
   

   Molamu oa silinda e sebetsang o kopantsoe le fereko
9. Re tlosa cylinder 'me ka rag re tlose mesaletsa ea mokelikeli o sebetsang le tšilafalo ho eona.

Bala hape ka tokiso ea clutch ea hydraulic: https://bumper.guru/klassicheskie-modeli-vaz/stseplenie/kak-prokachat-stseplenie-na-vaz-2107.html

Ho qhaqhoa le ho nchafatsa likarolo tsa RCS tse nang le bokooa

Ho qhaqha le ho lokisa silinda, o tla hloka:

• wrench 8;
• screwdriver slotted;
• lesela le hloekileng le hloekileng;
• maroki a itseng.

Silinda e sebetsang e arotsoe ka tatellano e latelang:

1. Tlamella silindara ka har'a vise.
2. Ka wrench e bulehileng bakeng sa 8, re manolla valve ea ho tsoa mali ebe re e hlahloba hore na e senyehile. Haeba ho belaelloa ho se sebetse hantle, re reka valve e ncha ebe re e lokisetsa ho e kenya.
   

   Ho kenngoa ha silinda e sebetsang ha ho koaletsoe ka senotlolo sa 8
3. Tlosa sekoahelo se sireletsang ka screwdriver e tšesaane e slotted.
   

   Sekoahelo se koaletsoe ka screwdriver e tšesaane
4. Re ntša pusher ho tloha ka silindara.
5. U sebelisa screwdriver, ka hloko ntša piston ho tsoa ka silindara.
   

   Ho tlosa piston, e sutumelletse ka ntle ho silinda ka screwdriver.
6. Tlosa selikalikoe sa ho boloka ka screwdriver.
   

   Ho tlosa lesale la ho boloka, o hloka ho le phunya ka screwdriver.
7. Tlosa seliba le washer ho tloha piston.
   

   Ha o qhaqha RCS, seliba se tlosoa piston
8. Tlosa cuff e ka morao.
   

   Ho tlosa washer le cuff e ka morao, ho lekane ho li tsamaisa
9. Tlosa cuff e ka pele ka screwdriver.
   

   Ho tlosa cuff e ka pele, o hloka ho e phunya ka screwdriver.
10. Hlahloba ka hloko bokahare bo ka hare ba cylinder (seipone) le bokaholimo ba piston. Haeba li na le li-scuffs kapa dents, silinda e lokela ho nkeloa sebaka ka ho feletseng.

Pele o nkela li-cuffs tsa piston sebaka le sekoahelo se sireletsang, likarolo tsa tšepe tsa silindara li tlameha ho hloekisoa ka litšila, lerōle, mesaletsa ea mongobo ka ho sebelisa brake fluid le rag e hloekileng. Litiiso tse ncha le sekoahelo li kenngoa nakong ea ts'ebetso ea kopano ea RCS. Ntlha ea pele, cuff e ka pele e behoa holim'a piston, ebe ka morao. Tabeng ena, cuff e ka morao e tsitsitsoe ka washer. Sekoahelo se sireletsang se kenngoa hammoho le pusher. Kopano ea sesebelisoa le ho kenngoa ha eona ho etsoa ka tatellano e fapaneng.

Video: ho lokisoa ha silinda ea lekhoba la clutch VAZ 2107

HO LOKISA CYLINDER EA CLUCH SEBETSANG VAZ-CLASSIC.

Ho tsoa mali ka clutch

Ka mor'a mosebetsi leha e le ofe o amanang le ho tepella maikutlo ha mochine oa clutch, hammoho le ha o fetola mokelikeli, mochine oa hydraulic o tlameha ho pompeloa. Bakeng sa sena o tla hloka:

• mokelikeli oa brake (0,3 l);
• hose ea rabara;
• senotlolo ho 8;
• sejana sa ho bokella mokelikeli (botlolo ea polasetiki e nang le lilithara tse 0,5 e loketse).

Ho phaella moo, o tla hloka mothusi bakeng sa ho pompa. Tsamaiso e tjena:

1. Ka mor'a ho kenya RCS le ho kopanya hose ho eona, tlatsa letamo la hydraulic drive ka mokelikeli ho ea boemong bo lekanang le moeli o ka tlaase oa molala.
2. Re beha ntlha e le 'ngoe ea hose e lokiselitsoeng pele holim'a valve e loketseng moea o tsoang mali, ebe re theola ntlha e' ngoe ka setshelo ho bokella mokelikeli.
   

   Karolo e 'ngoe ea hose e behoa holim'a sekoti, e' ngoe e theoleloa ka har'a setshelo ho bokella metsi
3. Re kopa mothusi hore a hatelle clutch pedal ka makhetlo a 4-5 ebe o e tšoara boemong bo tepeletseng maikutlo.
4. U sebelisa senotlolo sa 8, notlolla valve ea ho tsoa mali e kenang ka likarolo tse tharo tsa mothinya. Re emetse hore moea o tsoe ka cylinder hammoho le mokelikeli.
5. Re sotha ho kenya sebakeng ebe re kopa mothusi ho pheta ho tobetsa pedal. Eaba re ntša moea hape. Lipotoloho tsa ho tsoa mali li phetoa ho fihlela moea oohle o tsoile tsamaisong, 'me mokelikeli o se nang li-bubble o qala ho phalla ho tsoa sebakeng se loketseng.
   

   Hoa hlokahala ho tsoa mali ho fihlela mokelikeli o se nang li-bubble o tsoa hose
6. Ho hlahloba ts'ebetso ea clutch. The pedal lokela ho tepella maikutlo ka boiteko le ntle dips.
7. Eketsa brake fluid letamong ho ea boemong bo nepahetseng.

Litlhophiso tsa clutch drive

Ka mor'a ho pompa, ho kgothaletswa ho fetola clutch drive. Bakeng sa sena o tla hloka:

• caliper kapa (maemong a feteletseng) 'musi;
• li-wrenches tsa 8, 10, 13, 17;
• lipila tsa nko tse chitja kapa lithako.

Mokhoa oa ho beha clutch ho carburetor le mefuta ea ente ea VAZ 2107 e fapane. Boemong ba pele, boemo ba papali ea mahala ea clutch pedal bo lokisoa, molemong oa bobeli, boholo ba motsamao oa molamu oa cylinder o sebetsang.

Bakeng sa carburetor VAZ 2107, koloi e hlophisitsoe ka tsela e latelang:

1. Re lekanya boholo ba papali ea mahala (backlash) ea clutch pedal re sebelisa caliper. E lokela ho ba 0,5-2,0 limilimithara.
2. Haeba amplitude e le ka ntle ho meeli e boletsoeng, ka senotlolo sa 10, tlosa senotlolo sa senotlolo holim'a "stroke limiter stud", 'me u fetole moeli ka tsela e' ngoe kapa e 'ngoe, beha mokokotlo o hlokahalang.
   

   Lebelo le sebetsang la clutch pedal le laoloa ke moeli
3. Ka wrench ea 10, tiisa locknut.
4. Re hlahloba leeto le feletseng la pedal (ho tloha sebakeng se ka holimo ho ea tlaase) - e lokela ho ba 25-35 mm.

Bakeng sa ente ea VAZ 2107, koloi e lokisoa ka tatellano e latelang:

1. Re kenya koloi ka sekoting sa ho shebella kapa ho feta.
2. U sebelisa li-pliers, tlosa mohloli oa ho kopanya ho tloha ferekong ea clutch ho tloha tlase.
3. Re etsa qeto ea ho khutlela morao ha pusher ea cylinder e sebetsang ka ho hatella fereko ea clutch ho khutlela morao. E lokela ho ba 4-5 mm.
4. Haeba mokokotlo o sa oele ka har'a nako e boletsoeng, ka senotlolo sa 17 re tšoara linate tsa phetoho ea stem, 'me ka senotlolo sa 13 re tlosa nate ea ho lokisa.
   

   Ho tlosa linate tsa ho lokisa le ho lokisa, o hloka li-wrenches tsa 13 le 17
5. Ka senotlolo sa 8 re lokisa kutu ho tloha ho reteleha ka ho e tšoara ka lehetla, 'me ka senotlolo sa 17 re potoloha linate tsa phetoho ea stem ho fihlela mokokotlo oa eona o fetoha 4-5 mm.
   

   Ho khutlela morao ha stem ho lokisoa ka linate tse fetolang
6. Ha u se u tsitsitse nate ea ho lokisa sebakeng se lakatsehang ka senotlolo sa 17, tiisa nate ea senotlolo ka senotlolo sa 13.
7. Sheba leeto le felletseng la pedal. E lokela ho ba 25-35 limilimithara.

hose ea moqomo oa lekhoba

Hose e kopanyang phala le silinda e sebetsang e tlameha ho nkeloa sebaka haeba:

• tšenyo e bonahalang, e tsamaeang le ho lutla ha mokelikeli oa brake;
• ho lemoha mapetsong, ho ruruha (maqhubu) holim'a eona;
• ho roala maqhama a khoele a malebela.

Li-Hoses tse hlahisoang ke likhoebo tsa malapeng li na le nomoro ea lethathamo la 2101-1602590 'me li bitsa li-ruble tse ka bang 100.

Hose e na le karolo e sebetsang ea rabara le malebela a mabeli

Ho fetola hose:

1. Kenya koloi holim'a flyover kapa lesoba la ho shebella.
2. Phahamisa sekoaelo 'me u fumane ka phaposing ea enjene mateano a phaephe ea hydraulic drive le hose ea silinda ea makhoba.
3. Ka senotlolo sa 17, lokisa ntlha ea hose, 'me ka senotlolo sa 13, u lokolle sekeno se loketseng phala. Beha setshelo qetellong ea phala 'me u bokelle mokelikeli o tsoang ho sona.
4. U sebelisa 17 wrench, tlosa ntlha ea ntlha e 'ngoe ea hose ho tloha ntlong ea RCS. Rubber o-ring e kenngoa setulong sa cylinder, seo le sona se hlokang ho nkeloa sebaka.
5. Kenya hose e ncha ka tatellano ea morao.

Kahoo, ho hlahlojoa, ho lokisoa le ho nkela sebaka sa VAZ 2107 clutch lekhoba silinda ha ho thata haholo esita le ho mokhanni ea se nang phihlelo. Lisebelisoa tse fokolang tsa lisebelisoa le litlhahiso tsa litsebi li tla u lumella ho qeta mosebetsi oohle ka nako le chelete e fokolang.