Mokhoa oa ho Lekola Element ea Heater ea Metsi Ntle le Multimeter (DIY)

Na hitara ea hau ea metsi ea motlakase ha e futhumale hantle, e felloa ke metsi a chesang, kapa ha e hlahise metsi a chesang ho hang? Ho hlahloba karolo ea ho futhumatsa ho tla u thusa ho hlahloba bothata.

Leha ho le joalo, u ka 'na ua nahana hore sena ha se khonehe ntle le multimeter. U fositse, hobane tataisong ena ke tla u ruta mokhoa oa DIY (DIY) oa ho hlahloba ntho e futhumatsang ntle le multimeter.

Mabaka a etsang hore metsi a se futhumale

Ho na le mabaka a mang a khaello ea metsi a chesang. Pele o hlahloba likarolo, etsa bonnete ba hore sekhechana sa potoloho se buletsoe 'me ha sea khoptjoa.

Hape, ka ho toba ka holim'a thermostat e phahameng, tobetsa konopo ea reset ho cutoff e phahameng. O ka lokisa bothata ka ho seta bocha sekhechana sa potoloho kapa sesebelisoa sa maeto a mocheso o phahameng, empa e ka ba bothata ba motlakase joalo ka sesosa sa pele.

Sheba likarolo tsa heater ea metsi haeba li sebetsa hape.

Teko ea lintho tse futhumatsang: lits'ebetso tse peli

Lisebelisoa tse hlokahalang

• Mohloli oa motlakase o sa amaneng le motho
• Pliers tse nang le mehlahare e melelele
• Screwdriver
• Sesebelisoa sa ho futhumatsa
• Senotlolo sa ho futhumatsa
• Tsoelapele Tester

phetoho

Pele re fetela mefuteng ea lits'ebetso tsa ho lekola likarolo tsa heater ea metsi ntle le multimeter, a re ke re hlahlobeng heater ea metsi ea motlakase eo re tla sebetsa ho eona bakeng sa polokeho:

Li-linings li tlameha ho tlosoa

• Tima motlakase mochining.
• Ho fihlella li-thermostats le likarolo, tlosa likoahelo tsa tšepe.
• Netefatsa hore motlakase o timme ka ho thetsa likhokelo tsa motlakase ka sehlahlobi sa voltage e sa amaneng le khokahanyo.

Hlahloba lithapo

• Hlahloba lithapo tse lebisang ho futhumatsang metsi.
• Pele u lokela ho tlosa sekoahelo sa tšepe ka screwdriver ho kena ka likarolo.
• Tlosa insulator 'me u tšoare tester haufi le lithapo tse kenang ka holimo ho mocheso o phahameng oa mocheso.
• Hokela tester ho 'mele oa tšepe oa hitara ea metsi.
• U ka hlahloba likarolo tsa mocheso oa metsi haeba tester e sa khantše.

Mokhoa oa pele: Ho lekola Lintho tse Fokolang

Mona o tla hloka continuity tester.

• Lithapo li tlameha ho khaoloa ho tsoa ho li-terminal screws.
• Hokela e 'ngoe ea li-element screws ho sekotwana sa alligator.
• Thetsa screw e 'ngoe ka probe ea tester.
• Kenya sebaka se futhumatsang haeba se sa khantše.
• Ha e na sekoli haeba e sa che.

Mokhoa oa bobeli: teko ea potoloho e khutšoanyane

• Sekotwana sa likoena se lokela ho hokelloa ho se seng sa li-element's screws.
• Thetsa borakete ea elemente ka teko ea teko.
• Etsa tlhahlobo ho likarolo tsohle tse setseng.
• Potoloho e khuts'oane haeba letšoao la tester le bonesa; nakong ena, hoa hlokahala ho nkela sebaka sa heater ea metsi sebaka.

Ela hloko: Ka mor'a hore u leke lisebelisoa tsa hau tsa ho futhumatsa metsi 'me u fumane hore li boemong bo botle, thermostat kapa switch ea hau mohlomong ke mohloli oa bothata. Ho fetola ka bobeli ho tla rarolla bothata. Empa haeba e na le phoso, mona ke tataiso ea ho fetola karolo ea heater ea metsi:

Ho fetola ntho e nang le bothata

Mohato oa 1: Tlosa ntho e mpe

• Koala valve ea ho kenya metsi a batang.
• Bulela pompo ea metsi a chesang ka kichineng.
• Hokela hose ea metsi ho valve ea drain ebe u e bula ho ntša metsi ka tanka.
• Sebelisa senotlolo bakeng sa ho futhumatsa element ho manolla ntho ea khale.
• Ho fetola sokete, o tla hloka screwdriver e telele le e matla.
• Lokolla likhoele ka chesele e batang le hamore haeba e sa tsoe.

Mohato oa 2: Ho kenya elemente e ncha sebakeng

• Beha ntho e ncha ka har'a heater ea metsi ea motlakase e nang le wrench ea ho futhumatsa ebe o e tiisa.
• Hokela lithapo, ho etsa bonnete ba hore li hoketsoe ka mokhoa o sireletsehileng.
• Li-insulation le liaparo tsa tšepe li lokela ho nkeloa sebaka. Mme tsohle di lokile!

Lipotso tse atisang ho botsoa

Na likarolo tsohle tsa hitara ea metsi ea motlakase lia tšoana?

Lintho tse futhumatsang tse holimo le tse ka tlaase li tšoana, 'me li-thermostats tse holimo le tse ka tlaase le lisebelisoa tse phahameng tsa moeli li laola mocheso. Boholo ba lintho tse futhumatsang metsi tsa motlakase lia fapana, empa tse atileng haholo ke 12 ″. (300 limilimithara). (1)

Ho etsahala'ng ha ntho e futhumatsang e sa sebetse?

Lintho tse futhumatsang ka har'a heater ea metsi ea motlakase lia senyeha, e leng se bakang tahlehelo ea metsi a chesang. Metsi a hau a ka 'na a qala ho pholile butle-butle hobane karolo ea heater ea metsi e chele. U tla fumana metsi a batang feela haeba karolo ea bobeli ea heater ea metsi e hloleha. (2)

Konopo ea ho reset e etsa eng?

Konopo ea ho seta bocha sefuthumatsi sa hau sa metsi ke karolo ea polokeho e timang motlakase ho hitara ea hau ea metsi ha mocheso o ka hare ho eona o fihla likhatong tse 180 tsa Fahrenheit. Konopo ea reset e boetse e tsejoa e le sesebelisoa sa ho bolaea.

Tse ling tsa litataiso tse ling tsa ho ithuta tsa multimeter tseo re li thathamisitseng ka tlase u ka li sheba kapa ua li tšoaea bakeng sa litšupiso tsa nako e tlang.

• Mokhoa oa ho lekola capacitor ka multimeter
• Mokhoa oa ho hlahloba fuse ka multimeter
• Mokhoa oa ho lekola likharetene tsa Keresemese ka multimeter

likhothaletso

(1) mocheso - https://www.britannica.com/science/temperature

(2) ho futhumatsa - https://www.britannica.com/technology/heating-process-or-system